Revision history of "PH Meter - Orion Star A111"

Jump to navigation Jump to search

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

  • curprev 03:45, 25 January 2022‎ Pzieba talk contribs‎ 1,849 bytes +1,849‎ Created page with "= Interface = * The unit has a primary (larger) display, and a secondary (smaller) display. * "Mode" button switches between pH, mV, RmV and temperature modes. * The "measure" button is used to take a reading only if the meter is configured to operate in AUTO mode (where it will hold the last measurement on the screen after it stabilizes). ** It is also used as an escape key. It can be used to exit the setup menu or abort a calibration. = Menu Tree = * CONF Config (Sel..."
Retrieved from "http://wiki.woloschaklab.org/wiki/PH_Meter_-_Orion_Star_A111"